Clients

Home

Capabilities

Clients

Clients

Here is a selection of our main clients:

Accreditations

Cabot Design is granted approval in accordance with GKNAES supplier quality requirements and the terms of the relevant approval letter reference ASL-GAS077-02

Following audits by the British Standards Institute Cabot Design is registered to AS 9001:B
Reg. no. FS 82473.

Cabot Design have received approval to carry out Stress Analysis including Thermal Analysis work on behalf of Rolls-Royce plc inaccordance with RR9000:SABRe.

Cabot Design's QMS has been granted approval in accordance with Airbus AUK/SA/001-4 for structural analysis and non-linear finite element methods.

Here you can find information on recent activities at Cabot Design:

October 2011 : Cabot nears completion of work on A400M Wingtip for MSN6 and MSN7

> Cabot Design nears completion of the main static and F&DT work required for certification of the MSN6 Defence Aids Sub System (DASS) and MSN7 Common Standard Aircraft (CSA) wingtip structure.

> The completion of this project will mark the end of main certification work for the A400M entry into service.

October 2011 : Cabot starts work on A340 Breakthrough Laminar Aircraft Demonstrator in Europe (BLADE)

> Cabot Design has been awarded a part in development of the the Airbus A340 Breakthrough Laminar Aircraft Demonstrator in Europe (BLADE) wing structure.

> This research test aircraft hopes to test laminar flow technology and use more composite materials in its construction.

> This will involve replacement of the wing structure outboard of engines 1 and 4.

February 2011 : Cabot Design Assigned to A340 NLF Transition Structure B Scheme

Cabot Design has been assigned to support the Transition Structural Analysis through to B Scheme for the A340 Natural Laminar Flow (NLF) Flying Test Aircraft.